Amana Washer Error Code rL or F34

If you’ve encountered the Amana Washer Error Code rL or F34, don’t panic. This error typically indicates that items have been detected in the washer during the Clean Washer cycle. Understanding the nature of this error and how to resolve it is crucial to keep your Amana washer functioning smoothly.

Error Description:

During the Clean Washer cycle, if the washer detects items inside the drum, it triggers the rL or F34 error code. Additionally, the Int error code may be displayed, signifying that the wash cycle has either paused or been canceled. This commonly occurs when the washer stops the final spin cycle and transitions into drain mode, a process that may take up to 30 minutes to complete.

To remove the rL or F34 error code, follow these steps:

1. Press the pause/cancel button twice.
2. Press the power button once.

This simple sequence is often sufficient to reset the washer and clear the error code. However, if the issue persists, consider performing a manual reset:

1. Turn off the power to the washer.
2. Wait a few moments.
3. Turn the power back on.

This process can help reset the washer’s internal systems and resolve the error code.

Additional Tips:

• Ensure that the Clean Washer cycle is not overloaded with items, as this may trigger the error.
• Check for any obstructions in the drum that might be causing the detection of items during the Clean Washer cycle.

By following these steps and tips, you can effectively address the Amana Washer Error Code rL or F34. If the problem persists or if you have any concerns, don’t hesitate to contact the experts at Appliance Repair Los Angeles. Our skilled technicians are ready to assist you in resolving Amana washer issues promptly and efficiently.