Bosch Oven Door Issues

Bosch Oven Door Issues

If you’re experiencing door-related issues with your Bosch oven, it’s important to address them promptly to ensure the appliance operates safely and effectively. Here are some common Bosch oven door issues and how to handle them:

1. Difficulty Closing or Latching:

The oven door may have difficulty closing or latching properly due to misalignment, dirt, or debris obstructing the latching mechanism. Check for any visible obstructions on the door gasket or latch. Carefully realign the door and try closing it again. Clean the door gasket to remove any debris. Ensure the door hinges are not damaged and are properly aligned. If the issue persists, consult your oven’s user manual for specific guidance on door adjustment.

2. Loose or Damaged Handle:

Over time, the oven door handle may become loose or damaged, affecting its functionality and appearance. If the handle is loose, carefully tighten any screws or bolts that secure it to the door. If the handle is damaged, consider replacing it. You can order a replacement handle from the manufacturer or an appliance parts supplier. Follow the manufacturer’s instructions for replacement.

3. Broken Hinge:

A broken door hinge can lead to the oven door not opening or closing properly. If you suspect a broken hinge, it’s best to consult your oven’s user manual for guidance on inspecting and replacing the hinge. This repair may require some technical expertise.

4. Oven Door Glass Issues:

Cracked or shattered oven door glass can compromise the oven’s insulation and safety. In the case of cracked or shattered glass, it’s essential to contact a professional technician or the manufacturer for replacement. Replacing oven door glass can be a complex and potentially dangerous task.

5. Gasket Damage:

The door gasket, which seals the oven, may become damaged or loose over time. If the gasket is damaged, it’s advisable to replace it. Contact the manufacturer or an appliance parts supplier for a replacement gasket and follow the manufacturer’s instructions for installation.

For some door-related issues, you can attempt DIY solutions to resolve the problem. However, if you’re unsure about the condition of the oven door, if the issues persist, or if you encounter more complex door-related problems, it’s recommended to consult with a professional appliance repair technician. They have the expertise to diagnose and fix issues with the oven door to ensure the appliance operates safely and efficiently.

Bosch Oven Burner Problems (Gas Ovens)

Burner cap not on correctly

Make sure the cap is properly aligned on the burner head. If the cap is misaligned the igniter may not spark properly, and the burner flame will be uneven.

Bosch Range/Stove/Oven Spark Module

The spark modules provides power to each surface burner spark electrode. If the burner is produces a weak spark, or if the burner sparks intermittently, the spark module might be defective. Before replacing the spark module, first check the spark electrode and the spark wire. If the spark electrode and spark wire are not at fault, the spark module is likely defective. If the spark module is defective, replace it.

Incoming Power Problem

The electrical outlet may not be getting power. To determine if the outlet is getting power, try plugging something else into the outlet. If the outlet is not getting power, check the home circuit breakers or fuses.

Bosch Range/Stove/Oven Spark Ignition Switch

When the burner is turned on, the spark ignition switch sends voltage to the spark module to produce a spark. If the spark ignition switch is defective, it won’t send voltage to the spark module, and the burner won’t be able to produce a spark. If your range’s burner isn’t sparking, check to see if the other burners are sparking properly. If the other burners are sparking properly, the spark ignition switch is likely defective.

Bosch Range/Stove/Oven Spark Ignition Switch and Harness

Bosch Range/Stove/Oven Spark Electrode

The spark electrode sends a spark to ignite the gas in the burner assembly. If the spark electrode is defective or worn out, it might not produce a spark, or the spark might be too weak to ignite the gas. As a result, the spark electrode will make a clicking sound when the burner is turned on, but the burner won’t light. If the spark electrode is defective, replace it.

Bosch Range/Stove/Oven Surface Burner Valve

A stove burner that won’t light could be caused by a faulty surface burner valve. If you don’t hear the gas beginning to flow when you turn on the valve, the valve is likely defective and will need to be replaced.

Bosch Range/Stove/Oven Surface Burner Base

A stove burner that won’t light could be caused by a misaligned or corroded surface burner base. The base holds the orifice holder and electrode in place to allow ignition. Inspect the base for any damage or corrosion and replace the component if necessary.

Bosch Range/Stove/Oven Surface Burner Orifice Holder

A stove burner that won’t light could be caused by a bent or damaged surface burner orifice holder not allowing the gas to be ignited by the electrode. Inspect the holder to see if it’s misaligned and replace with a new one as required.

Bosch Oven Unusual Noises

Unusual noises coming from your Bosch oven can be concerning, but they are often an indication of an issue that can be diagnosed and addressed. Here are some common unusual noises in Bosch ovens and how to handle them:

1. Rattling or Banging Sounds:

These noises may occur when cookware or utensils inside the oven come into contact with the oven’s interior surfaces, the oven racks, or each other during cooking. Ensure that your cookware and oven racks are correctly positioned to prevent them from rattling or touching during cooking. Avoid overloading the oven with too many items.

2. Whirring or Humming Sounds:

These sounds can be related to the oven’s convection fan, which circulates hot air for even cooking. It’s normal to hear the fan while the oven is in operation. There is generally no issue with these sounds, as they are part of the oven’s normal operation.

3. Clicking or Ticking Sounds:

Clicking or ticking noises may occur as the oven heats up or cools down. These sounds can come from the expansion and contraction of the oven’s metal components. These sounds are typically harmless and should not be a cause for concern.

4. Fan Motor Noise:

Unusual noises from the oven’s fan motor may indicate an issue with the motor or its components. If you suspect an issue with the fan motor, it’s best to consult your oven’s user manual for guidance on inspecting or replacing the fan motor. If the noise continues, professional repair may be necessary.

5. Grinding or Screeching Noises:

These harsh sounds may be due to an issue with the oven’s convection fan, cooling fan, or other moving parts. If you hear grinding or screeching noises, it’s advisable to stop using the oven and contact a professional technician for diagnosis and repair. These noises may indicate worn-out components that need attention.

6. Clunking or Knocking Sounds:

These sounds can be caused by the oven racks, especially if they are not properly positioned or if they warp over time. Ensure that oven racks are correctly placed and not touching the oven’s interior walls or each other. If racks are damaged or warped, consider replacing them.

It’s essential to distinguish between normal operational sounds and unusual noises that might indicate a problem. If you’re concerned about any unusual noises coming from your Bosch oven, and if those noises persist after taking the appropriate DIY steps, it’s advisable to seek professional appliance repair. Qualified technicians can diagnose and address any issues to ensure your Bosch oven operates quietly and efficiently.

Bosch Oven Oven Light Malfunction

Bosch Range/Stove/Oven Oven Control Board

The oven control board is used to send voltage to nearly all of the oven’s electrical components including the lights. If the control board is defective, it may be unable to send voltage to the light bulb or light board, although this is not a common problem. You can use a multimeter to determine if power is reaching the light socket or light assembly. If power is not reaching the light socket or light assembly and the light switch tests positive for electrical continuity when tested with a multimeter, then the control board is likely defective and will need to be replaced.

Bosch Range/Stove/Oven Light Assembly

If the oven light is out, the entire light assembly may need to be replaced. Often the light assembly components are not sold separately.

Bosch Range/Stove/Oven Light Bulb

To determine if the light bulb has burned out, use a multimeter to test it for continuity, or install the bulb into an identical socket to test it.

Bosch Range/Stove/Oven Halogen Lamp

To determine if a halogen lamp has failed, you can use a multimeter to test it for electrical continuity, or install the lamp into an identical socket to test it.

Bosch Range/Stove/Oven Light Socket

Use a multimeter to test for power to the light socket. If the light socket is getting power, but the oven light won’t work, this indicates that the light socket is defective. If the light socket is defective, replace it.

Bosch Range/Stove/Oven Light Housing

If you’ve determined the light bulb has not burned out or the light board appears to be functioning normally, it’s possible that the light housing the bulb or board is installed in is faulty. Use a multimeter to determine if power is reaching the light socket or light assembly. If power is reaching the socket or assembly, then it’s likely the light housing is malfunctioning and will need to be replaced.

Bosch Range/Stove/Oven Light Switch

To determine if the light switch is defective, use a multimeter to test it for continuity. If the light switch does not have continuity, replace it.

Bosch Range/Stove/Oven Touchpad and Control Panel

The touchpad and control panel regulate the power supply to all of the oven components, including the oven light. If the touchpad and control panel assembly is defective, it won’t signal the oven control board to turn on the oven light. However, this is rarely the case. First, test the light bulb and socket. If the light bulb and socket are not defective, the touchpad and control panel assembly might be at fault.

Bosch Range/Stove/Oven Touchpad

The touchpad has a button that controls the oven light. If this button is defective, the touchpad won’t signal the oven control board to turn on the oven light. However, this is rarely the case. First test the light bulb, socket, and switch. If none of these components is defective, the touchpad might be at fault.

Bosch Range/Stove/Oven Control Board

The control board is used to send voltage to nearly all of the oven’s electrical components including the lights. If the control board is defective, it may be unable to send voltage to the light bulb or light board, although this is not a common problem. You can use a multimeter to determine if power is reaching the light socket or light assembly. If power is not reaching the light socket or light assembly and the light switch tests positive for electrical continuity when tested with a multimeter, then the control board is likely defective and will need to be replaced.

Bosch Range/Stove/Oven Transformer

The transformer might be defective. However, this is rarely the case. First check the light bulb, socket, and light switch. If none of these components is defective, the transformer might be at fault. The transformer is not repairable—if the transformer is defective, you must replace it.

Bosch Range/Stove/Oven Main Control Board

The main control board is used to send voltage to nearly all of the oven’s electrical components including the lights. If the control board is defective, it may be unable to send voltage to the light bulb or light board, although this is not a common problem. You can use a multimeter to determine if power is reaching the light socket or light assembly. If power is not reaching the light socket or light assembly and the light switch tests positive for electrical continuity when tested with a multimeter, then the control board is likely defective and will need to be replaced.

Bosch Oven Convection Fan Problems

Bosch Range/Stove/Oven Control Board

An oven’s control board sends voltage to nearly all of the oven’s electrical components. If the control board is defective, the voltage may not be sent to the fan motor. You should first attempt to rotate the fan blades by hand. If they do not turn freely, it’s likely the fan motor bearings have seized and the fan motor will need to be replaced. However, it the fan blades do turn freely and a multimeter shows that the motor itself tests positive for electrical continuity, then the control board is probably at fault. You can inspect the board for signs of damage or a shorted component and replace if necessary.

Bosch Range/Stove/Oven Cooling Fan

The cooling fan runs to help keep the range itself and its critical parts from overheating. The cooling fan is often sold as an assembly. If the fan does not turn freely or has power to it but won’t run, it will need to be replaced.

Bosch Range/Stove/Oven Convection Motor

In a convection oven, the convection motor drives the convection fan to circulate the air inside the oven. If the convection fan isn’t circulating the air, the oven won’t bake evenly. Try turning the convection fan blade by hand. If the blade is hard to turn, this may indicate that the motor bearings are worn. If the motor bearings are worn, you will have to replace the convection motor. To determine if the motor is defective, use a multimeter to test it for continuity. If the motor does not have continuity, replace it.

Bosch Range/Stove/Oven Main Control Board

If the oven fan is not working, the main control board may not be sending power to the fan motor. Check the wiring diagram first before replacing the board. Control boards are often misdiagnosed.

Bosch Range/Stove/Oven Blower Motor

If the blower motor’s fan blades or blower wheel do not turn freely by hand, it’s likely the motor bearings have seized and the blower motor will need to be replaced. You can also use a multimeter to determine if the motor has electrical continuity. If the motor has no electrical continuity, the part is definitely defective.

Bosch Range/Stove/Oven Fan Motor

If the fan motor’s fan blades do not turn freely by hand, it’s likely the motor bearings have seized and the fan motor will need to be replaced. You can also use a multimeter to determine if the motor has electrical continuity. If the motor has no electrical continuity, the part is definitely defective.

Bosch Oven Door Seal Issues

If you’re experiencing door seal issues with your Bosch oven, it’s essential to address them promptly. A damaged or worn door seal can lead to various problems, including heat loss, uneven cooking, and even safety concerns. Here’s how to identify and address Bosch oven door seal issues:

Identifying Door Seal Issues:

Uneven cooking: If your Bosch oven is not cooking food evenly, leaving some parts undercooked while others are overcooked, it may indicate a compromised door seal.
Heat escaping: If you feel heat escaping from around the oven door during operation, it’s a sign that the seal is no longer sealing the oven properly.
Visible damage: Inspect the door seal for any visible signs of damage, such as cracks, tears, or wear. Even small damage can affect the seal’s effectiveness.

Addressing Bosch Oven Door Seal Issues:

Cleaning and Maintenance:

Before taking any further steps, make sure the door seal is clean and free from debris. Remove any crumbs, grease, or residue that might affect the seal’s performance.
Reposition the Seal:

If the seal appears misaligned, try repositioning it. Gently adjust the seal to ensure it fits snugly against the oven door. Proper alignment can resolve some sealing issues.
Seal Replacement:

If the door seal is visibly damaged or severely worn, it’s recommended to replace it. You can order a replacement seal from the manufacturer or a reputable appliance parts supplier. Follow the manufacturer’s instructions or your oven’s user manual for guidance on replacing the seal.
Professional Repair:

If you’re uncertain about the condition of the door seal or if the issues persist after cleaning, repositioning, or replacing the seal, it’s advisable to seek professional repair. Technicians can assess the door seal, ensure it’s properly installed, and address any underlying issues.

Properly functioning door seals are crucial for the efficient operation of your Bosch oven. They help maintain the desired cooking temperature and prevent heat loss, ultimately ensuring that your meals are cooked evenly and to perfection. If you have any doubts about your ability to address door seal issues, it’s best to consult with a professional appliance repair technician to ensure that your Bosch oven operates safely and effectively.

Bosch Oven Self-Cleaning Problems

Bosch Range/Stove/Oven Touchpad

The door lock indicator light should come on and you should hear the lock motor running when the self-clean button is pressed. If the indicator light does not come on and you don’t hear a low humming noise as the door is being locked, it’s likely the oven’s touchpad is faulty and will need to be replaced.

Bosch Range/Stove/Oven Door Lock Motor and Switch Assembly

During the oven’s self-cleaning cycle, the door lock switch activates the door lock motor to prevent the oven door from being opened. If the door lock motor and switch assembly is defective, the oven door will not unlock once the self-cleaning cycle is complete. On most ovens, you can open the oven door by removing certain screws or panels. Check your owner’s manual for further instructions.

Bosch Range/Stove/Oven Temperature Control Thermostat

The oven thermostat sends voltage to the heating circuit and regulates the temperature of the oven during the self-cleaning cycle. It is possible for the oven thermostat to function properly for baking and broiling but not for cleaning. Due to its complexity, the oven thermostat is difficult to test. If you suspect the oven thermostat is at fault, replace it.

Bosch Range/Stove/Oven Door Latch

For your safety, the self-clean cycle will not begin unless the oven door is locked. If the door latch is broken and unable to allow the door to be locked, the self-clean cycle will not begin. Inspect the latch for damage. You can also use a multimeter to test the latch assembly’s microswitch, if applicable, to determine if the switch has appropriate electrical continuity. If the latch is damaged or the microswitch tests negative for continuity, the door latch should be replaced.

Bosch Range/Stove/Oven Oven Control Board

The oven control board has relays that send voltage to the bake and broil circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.

Bosch Range/Stove/Oven Control Board

The control board has relays that send voltage to the bake and broil circuits according to the user settings and sensor input. If the control board is defective, it may not send voltage to the heating components.

Bosch Range/Stove/Oven Door Switch

A defective door switch may prevent the oven door from locking. The door switch is often part of the circuit that causes the oven door to lock during the self-cleaning cycle. If the oven door is unable to lock, the self-cleaning cycle will not start. To determine whether the door switch is defective, use a multimeter to test it for continuity. If the door switch does not have continuity, replace it.

Bosch Range/Stove/Oven Temperature Sensor

An oven’s temperature sensor monitors the temperature inside the oven cavity in order to maintain an accurate temperature. The temperature sensor may be out of calibration or stop working properly after it heats up. The sensor can be tested for a proper ohm reading at a set temperature with a multimeter to help determine if the part is defective or not.

Bosch Oven Control Panel Malfunctions

Bosch Range/Stove/Oven Oven Control Board

The oven control board displays the time, temperature, and settings for the range. If the oven control board has power to it but the display is dead, missing digits or dim, it will need to be replaced.

Bosch Range/Stove/Oven Display Board

If the display board is dead it may not be getting power from the main control board. If there is power to the display board but the display is dead, missing digits or dim, it will need to be replaced.

Bosch Range/Stove/Oven LED Board

The range’s LED board will usually display the time, temperature, and settings for the range. If the display only partially shows digits or is dim, it’s likely the LED board is faulty and should be replaced (if the whole display is not working, a defective control board is more likely the cause of the problem).

Bosch Range/Stove/Oven Main Control Board

The main control board sends power to the display board to operate. If the display board is not receiving power, the main control board is likely bad and will need to be replaced.

Incoming Power Problem

Electric ranges require 240 volts of alternating current. Gas ranges require 120 volts. If the display board is not working, there could be an incoming power problem. For a gas range, if the oven light comes on and the burner sparks the range has power. For an electric range, turn on one of the surface elements. If any of the surface elements are working, the range has power. If the range does not have power, check for a tripped circuit breaker or blown fuses and correct as needed.

Range in lock mode

Many ranges have a child lock or “Sabbath” feature which will prevent the buttons from being used when the feature is engaged. The range could also be in “Demo” mode or another mode which prevents full operation. Consult the range’s user manual for information regarding locking/unlocking the control panel.

Bosch Range/Stove/Oven Control Board

For many ranges, the control board interacts directly with the display to show the time, temperature, and settings for the range. If the control board has power to it but the entire display is not working, the control board is likely at fault and will need to be replaced.

Bosch Range/Stove/Oven Control Panel

The range’s control panel will usually display the time, temperature, and settings for the range. If the control panel has power to it but the display is dead, missing digits or dim, it will need to be replaced.

Bosch Range/Stove/Oven Radiant Surface Element

If some of the range’s main display is still working, but the surface element “hot” indicator light does not, it’s likely a radiant surface element is defective. You can use a multimeter to test the radiant element for electrial continuity to help determine if the part is faulty.

Bosch Range/Stove/Oven Surface Element Switch

If some of the range’s main display is still working, but the surface element “on” indicator light does not, it’s likely a surface element switch is defective. You can use a multimeter to test the surface element switch for electrial continuity to help determine if the part is faulty.

Bosch Oven Faulty Heating Elements

A Bosch oven not heating properly not means you have a dilemma to resolve, and most likely on an empty stomach. Fortunately, we can solve both problems ASAP with our Bosch oven troubleshooting guide. From a lack of power to a blown thermal fuse, we’ll pinpoint your Bosch oven heating problems.

HOW TO TROUBLESHOOT A BOSCH OVEN NOT HEATING PROPERLY

Whether it’s insufficient heat, unevenly cooked food, or no heat at all, a Bosch oven not heating properly feels like a worst-case scenario. However, many heating issues can have a simple and straightforward solution when you know where to begin. Our guide gives you the starting points you need to execute a fast fix.

#1 – No Power To Bosch Oven

When asking, “Why won’t my Bosch oven heat up?” sometimes the answer lies with your power source and not the oven. If your Bosch oven isn’t receiving power, it won’t be able to provide heat. Here’s how to check your power sources to make sure your oven has adequate electricity:

Make sure your oven is properly plugged in.
Refrain from using an extension cord with your oven, as most cords can’t safely transmit the electricity an oven requires.
Check your circuit breaker for blown fuses or tripped breakers, especially if you experience a power outage.

#2 – Bosch Oven Clock Reset

After a power outage the clock on your oven will revert to its factory setting and flash “00:00.” Your Bosch oven will not operate until you reset the clock’s time and “00:00” is no longer flashing.

#3 – Bosch Oven Not Calibrated Correctly

If you’re dealing with long cooking times, undercooked food, or food that’s not cooked evenly, it’s possible the oven thermostat needs recalibrating. Recalibrating your oven can better enable the temperature setting to match the oven’s internal temperature and facilitates more accurate cooking times.

Most ovens can be recalibrated in increments of 35°F at a time via your control panel. Check your owner’s manual for the exact calibration steps for your model oven. If recalibrating doesn’t fix your Bosch oven not heating up, there’s a small chance your oven thermostat is faulty and requires replacement.

#4 – Blown Oven Thermal Fuse

The thermal fuse on your Bosch oven is a protective feature that prevents the oven from overheating. The thermal fuse will blow if the oven gets too hot, cutting power to the oven and forcing it to cool down.

An oven’s thermal fuse can blow when exposed to the high temperatures of a self-cleaning cycle. To prevent this occurrence, the best way to clean an oven avoids the self-cleaning feature altogether. A thermal fuse can also blow if the fuse is faulty. In either case, if multimeter testing reveals a lack of continuity, the fuse must be replaced.

#5 – Oven Component Malfunction

If these troubleshooting tips still leave you with a Bosch oven not heating properly or that leaves food unevenly cooked, it’s possible a broken part is to blame. These components can leave you with heating problems when they malfunction:

Heating elements: The heating elements at the top and bottom of an electric oven work together to create even heating, while the top element also broils food. If one of these elements breaks or malfunctions your oven won’t heat up properly or not heat up at all. Heating element malfunctions are diagnosable by a lack of continuity. You may also notice visible damage or a lack of red glow in the heating element.
Convection motor: Convection ovens use a fan to circulate heat throughout the oven’s interior, resulting in more even heating and faster cooking. If the motor that powers the fan malfunctions, the fan won’t operate and the oven’s air won’t circulate, resulting in improper heating.

In either instance, these components cannot be repaired and require replacement. We recommend professional service for these complex repairs.

Bosch Oven Temperature Inconsistencies

Bosch Range/Stove/Oven Bake Element

When the bake element is heating properly, it glows red hot. If the element does not glow red, this indicates that the element is not heating. Often, if the heating element has burned out, it will be visibly damaged. Inspect the heating element for holes or blisters. To determine if the bake element has burned out, use a multimeter to test the element for continuity. If the bake element does not have continuity, replace it.

Bosch Range/Stove/Oven Control Board

An oven’s control board will often be used to send voltage to the bake and broil elements or the igniters to heat the oven to the designated temperature. When a temperature sensor senses that the oven has reached the appropriate temperature, the control board should shut off the voltage to the heating circuit. If the control board is defective, the voltage may be shut off too early or not at all, resulting in an inaccurate oven temperature. You should test the temperature sensor and other components first before considering replacing the control board. If you confirm the other components are working properly, you can inspect the board for signs of damage or a shorted component. You can also use a multimeter to test for voltage reaching the bake or broil elements or igniters after reviewing the appliance’s wiring diagram.

Oven calibration needed

The first thing to consider is that oven temperature will fluctuate throughout the cooking process. This is normal. To verify oven temperature, it is best to use a digital thermometer with the wire lead end touching a cast iron skillet to keep the temperature reading even. You can use a dial thermometer, but they are slow to react and are not as accurate as a digital one. Heat the oven to 350 degrees Fahrenheit. Let the oven cycle on and off for at least 20 minutes. Check the temperature. If the oven temperature is over or under by 35 degrees Fahrenheit the oven thermostat, oven sensor, or oven control (depending on the model), is likely bad. If the temperature is within 35 degrees above or below the set temperature, it can likely be recalibrated succcessfully. Refer to your owner’s manual.

Bosch Range/Stove/Oven Igniter

The igniter draws electrical current through the gas valve to open it. As the igniter weakens over time, it takes longer to open the gas valve. As a result, the oven temperature will drop too low before the burner reignites. The oven temperature should not drop more than 40 degrees Fahrenheit before the igniter relights the burner.

Bosch Range/Stove/Oven Broil Element

The broil element may have burned out. When the broil element is heating properly, it glows red hot. If the element does not glow red, this indicates that the element is not heating. Often, if the element has burned out, it will be visibly damaged. Inspect the broil element for holes or blisters. To determine if the broil element has burned out, use a multimeter to test the element for continuity. If the broil element does not have continuity, replace it.

Bosch Range/Stove/Oven Main Control Board

A range’s main control board will often be used to send voltage to the bake and broil elements or the igniters to heat the oven to the designated temperature. When a temperature sensor senses that the oven has reached the appropriate temperature, the control board should shut off the voltage to the heating circuit. If the control board is defective, the voltage may be shut off too early or not at all, resulting in an inaccurate oven temperature. You should test the temperature sensor and other components first before considering replacing the control board. If you confirm the other components are working properly, you can inspect the board for signs of damage or a shorted component. You can also use a multimeter to test for voltage reaching the bake or broil elements or igniters after reviewing the appliance’s wiring diagram.

Bosch Range/Stove/Oven Temperature Control Thermostat

The temperature control thermostat monitors the temperature inside the oven and cycles on the heat when the oven temperature gets too low. If the temperature control thermostat is not calibrated correctly, it won’t cycle on the heat at the proper time. As a result, the oven temperature might be too high or too low. Due to its complexity, the thermostat is very difficult to test.

Bosch Range/Stove/Oven Temperature Sensor

The oven sensor works in conjunction with the oven control board to regulate the temperature. The sensor regulates the oven temperature by varying its resistance to electrical current as the oven temperature varies. As the oven temperature rises, the oven sensor creates greater resistance. If the sensor gives the wrong amount of resistance, the oven may not bake evenly. On some models, you can recalibrate the oven control up to 35 degrees Fahrenheit higher or lower. Refer to your owner’s manual for instructions on how to recalibrate the oven control.

Bosch Range/Stove/Oven Oven Control Board

The oven control board works in conjunction with the oven sensor to regulate the temperature. The sensor regulates the oven temperature by varying its resistance to electrical current as the oven temperature varies. As the oven temperature rises, the oven sensor creates greater resistance. If the sensor gives the wrong amount of resistance, the oven may not bake evenly. Or if the oven control board does not read the sensor resistance correctly, the oven temperature may be inaccurate. On some models, you can recalibrate the oven control up to 35 degrees Fahrenheit higher or lower. Refer to your owner’s manual for instructions on how to recalibrate the oven control.

Bosch Range/Stove/Oven Convection Element

In a convection oven, the convection element works with the other heating elements to heat the air circulating inside the oven. If the convection element is burned out, the oven won’t heat evenly. To determine if the convection element is burned out, use a multimeter to test the element for continuity. If the convection element does not have continuity, replace it.